Mesanovic Model 2
1.249,00 €*
A new take on ribbon design
The Model 2 is a ribbon microphone that pushes modern design to its limits. The Model 2 is a passive ribbon that is completely handcrafted in Detroit, Michigan. It features a 1.8 micron thick, 2 inch long pure aluminum ribbon. The ribbon motor was designed to have a very short front to back path length as well as custom resonator plates. These features give the Model 2 an incredibly extended high frequency response, while retaining classic ribbon midrange and a rich, low end that reaches flat out to 20 Hz. You can hear the high frequency "air" in this microphone, something not common in ribbons. The Model 2 features our unique in house wound toroidal transformer. This transformer provides extremely low distortion, low noise, incredible high frequency detail, and a 3D like sound. The microphone's slim body (1.25 inches in diameter) allows it to be used with most third party shockmounts and allows for quick and easy set up.
The Model 2 sounds great on all sources. Its smooth, flat extended response makes it an excellent choice on vocals, guitar amps, drums, strings, brass, piano, and much more. We recommend using this mic on sources where you would usually not reach for a ribbon, we guarantee you won't be disappointed. Like the Model 1, the Model 2 also delivers an amazingly quick transient response.
We offer a lifetime warranty with our microphones because we are certain they are built for years of use. The microphone ships with a plastic carry case, mount clip, and protective pouch.
Specifications:
Directional Pattern: Bidirectional
Frequency Range: 20-20 kHz and beyond
Sensitivity: -53.2 dB (2.2 mV/Pa)
Noise Floor: <17 dBA
Max SPL: 140dB SPL
Output Impedance: 250 Ohms
Ribbon Element:
Material: Pure Aluminum
Thickness: 1.8 microns
Length: 2 in
Width: 0.23 in
Dimensions:
Height: 7.4 in
Diameter: 1.25 in
Weight: 340 g
Mesanovic Model 2A
1.449,00 €*
The active version of the Model 2
The Model 2A is an active version of the Model 2 ribbon microphone. The Model 2A utilizes the same design features found in the Model 2 and offers the same unique sonic character. The microphone contains our signature motor structure and custom designed resonator plates to provide the incredibly extended, detailed, and 3D like response found in our Model 2.
The Model 2A’s high output is provided by a custom, in house wound, toroidal transformer. This high turn ratio transformer is perfectly matched to the Model 2A’s ribbon to provide optimal performance. The phantom powered electronics work as an impedance buffer and provide no additional gain or coloration to the sound. The result of this ideal impedance matching is 13 dB more output than the Model 2 and extremely low self-noise.
With its high output level, the Model 2A will work perfectly with any preamplifier. Whether you are using an entry-level interface or a high end dedicated preamp, the Model 2A will deliver stunning results. The Model 2A excels on quieter sources such as acoustic guitar, vocals, strings, and piano - yet still delivers beautifully on louder sources like guitar amps and drum overheads. The Model 2A also shines on location recordings of choirs and orchestras where low noise and high output is needed.
The Model 2A is covered by a lifetime parts warranty and a free re-ribboning for the original owner within two years of purchase. The microphone ships with a plastic carry case, mount clip, and protective pouch.
Specifications
Directional Pattern: Bidirectional
Frequency Range: 20-20kHz and beyond
Sensitivity: -40.2 dB (9.8 mV/Pa)
Self Noise: 11 dB(A)
Max SPL: 140dB SPL
Output Impedance: 170 Ohms
Ribbon Element:
Material: Pure Aluminum
Thickness: 1.8 microns
Length: 2 in
Width: 0.23 in
Dimensions:
Height: 7.4 in
Diameter: 1.25 in
Weight: 340g
Mesanovic Model 2S
2.129,00 €*
Model 2 sound in a stereo package
The Model 2S is a passive stereo ribbon microphone utilizing the same design features found in the Model 2. The Model 2S uses two matched ribbon motors angled at 90 degrees to each other to create a Blumlein configuration. It uses the same motors and transformers found in our Model 2. The motors feature a very short front to back path length along with our custom designed resonator plates. These features give the Model 2S the same unique sonic character found in our Model 2: an incredibly extended and detailed high end, classic smooth ribbon midrange, an open and transparent low end, and an amazingly quick transient response. A custom designed toroidal transformer provides extremely low distortion, low noise, and 3D like sound.
The Model 2S captures stunning stereo recordings with ease. Whether you are using the Model 2S in a Blumlein or M-S stereo configuration, the microphone's uniform polar frequency response and excellent off-axis frequency response will provide you with outstanding phase coherent stereo recordings. Solid phase compatibility between the two channels of the Model 2S also allows the user to combine the two channels into a mono recording without any phase artifacts. The microphones slim body and simple isolation mount make it easier than ever to position.
The beauty of the Model 2S is its ability to capture incredible 3D like recordings that will make you feel like you are in the room with the performers. Its beautifully balanced and extended frequency response greatly reduces the need for post equalization. The Model 2S shines on orchestral and choral recordings. It will have you hearing drum overheads and room recordings like never before. The Model 2S will easily become your favorite on string sections, horn sections, piano, acoustic guitar, and so much more.
The Model 2S is covered by a lifetime warranty on parts and a free re-ribboning for the original owner within two years of purchase. The microphone ships with a plastic carry case, mount clip, protective pouch, and a 5-pin XLR female to dual 3-pin XLR male breakout cable.
Specifications
Directional Pattern: Dual Figure 8
Frequency Range: 20-20 kHz and beyond
Sensitivity: -53.2 dB (2.2 mV/Pa)
Noise Floor: <17 dBA
Max SPL: 140dB SPL
Output Impedance: 250 Ohms
Ribbon Element: Dual ribbons orientated at 90 degrees
Material: Pure Aluminum
Thickness: 1.8 microns
Length: 2 in
Width: 0.23 in
Dimensions:
Height: 11.6 in
Diameter: 1.25 in
Weight: 540g